View source for Compiling wxWidgets 2.8.6 to develop Code::Blocks (MSW)

'''Note: This is an copy of Compiling wxWidgets 2.6.2 to develop Code::Blocks (MSW)'''
http://wiki.codeblocks.org/index.php?title=Compiling_wxWidgets_2.6.2_to_develop_Code::Blocks_%28MSW%29

'''That is being updated for wxWidgets 2.6.3'''

These are the instructions for compiling wxWidgets for use with Code::Blocks. They are primarily intended in preparation for compiling Code::Blocks itself but (hopefully) may also help installing wxWidgets for general development using that framework.

Although these instructions are targeted at the Windows operating system, it should be possible to apply them with slight adjustments to other platforms, since we make use of MinGW.

== Installing MinGW ==
Directions to install MinGW for Code::Blocks can be found here.
[[MinGW installation]]

== Installing the wxWidgets source code ==
The wxWidgets 2.6.3 distribution can be found at the [http://www.wxwidgets.org/downloads/#previous_stable wxWidgets download site]. (Note that there is also a winhelp file available.) You can choose between an installer and a zip file. You can just get the zip file because the installer is also a zipped version.

If you use the plain zip version, make sure to unzip using the full path. Otherwise the directories won't be created correctly.

The patches wxWidgets 2.6.3 distribution can be found at the 
[http://www.wxwidgets.org/downloads/patch.htm wxWidgets download site].

'''NOTE:''' For the remainder of these instructions we call the wxWidgets directory ''<WXWIN>''. You have to change it to your corresponding directory (e.g. "c:\wxWidgets-2.6.3").

'''NOTE:''' You do not need MSYS. Furthermore, you cannot have MSYS in your path, or the wxWidgets compilation will fail. Thus, if you have MSYS installed, ensure that ''<MSYS>\bin'' '''is not''' in your path before compiling wxWidgets. wxWidgets must be compiled from a "regular" command line (like cmd.exe), not from a Unix-like shell. The same problem could arise if Cygwin is in the path.

'''NOTE:''' For the remainder of these instructions we call the MinGW directory ''<MINGW>''. You have to change it to your corresponding directory (e.g. "C:\MinGW").

== Checking make version ==
If you didn't install MinGW yourself you have to ensure you are using a recent enough version of the make utility. Open a command prompt and type:
 <tt>cd <MINGW>\build\msw
 mingw32-make -v</tt>
The version should read 3.80 or greater, else you need to install a newer version.

== Building wxWidgets ==
Now it is time to compile wxWidgets, open the command promt and change to the wxWidgets directory:
 <tt>cd <WXWIN>\build\msw</tt>

'''NOTE: The following instructions do not work with MSYS, or other forms of Unix on Windows.'''

Now the first thing to do is to clean up the source:
 mingw32-make -f makefile.gcc MONOLITHIC=1 SHARED=1 UNICODE=1 BUILD=release clean
'''NOTE:''' Make sure you use exactly the same options for this step and for the build step below. The clean target uses these variables and only cleans the specified version of the generated object and library files (so it will actually not clean the intended files if these variables are not identical).

'''NOTE:''' If you still have problems with compiling after cleaning, you could try to manually remove the gcc_msw directory under the build\msw directory. This directory is the place where the object files are stored.

When everything is clean you can start actually compiling wxWidgets:
 mingw32-make -f makefile.gcc  MONOLITHIC=1 SHARED=1 UNICODE=1 BUILD=release

'''NOTE:''' These options are the officially supported Code::Blocks options. If you want another version of wxWidgets (debug or non-unicode) you still have to make sure you build a MONOLITHIC version (one big DLL) for linking Code::Blocks against.

Now you can get a cup of coffee or do something else because this step takes some time. Make sure there was no compilation error before you continue.

'''NOTE:''' If you're having errors because of libjpeg, you might want to look at [http://sourceforge.net/tracker/?func=detail&atid=309863&aid=1606032&group_id=9863 this patch]

== Compiling Code::Blocks ==
=== Setting up paths ===
Before finally compiling Code::Blocks itself, you need to setup the paths:
*Open the Code::Blocks project (CodeBlocks.cbp).
*It will ask you to define a [[Global compiler variables|Global variable]]
*Set the path to where you have wxWidgets installed (e.g. "c:\wxWidgets-2.6.3").
*Compile Code::Blocks.

=== Post compilation steps ===
When the compilation process is finished, simply run the update.bat script. It will ensure that all resource files Code::Blocks uses are in the right place and up to date.

== Building wxWidgets 2.6.2 using VC++ Toolkit 2003 ==
I'll just throw in my notes on the process for both compiler versions as getting VC++ toolkit to work is quite a pain. Code::Blocks needs a couple of changes to support wxWidgets with the VC++ toolkit seamlessly.

install VCToolkitSetup.exe <br>
install PlatformSDK <br>
install .NET Framework SDK Version 1.1 <br>
run PlatformSDK->'''Run all''' Windows XP 32-bit Build Environment (Retail) batch files '''(find them in '''PlatformSDK\Setup''')''' <br>
C:\Program Files\Microsoft Visual C++ Toolkit 2003\'''Vc7\bin'''\vcvars32.bat (not needed) <br>
<br>
'''The following environment vars must be set/modified/added via 'Control Panel | System | Advanced | Environment Variables'.'''
<br>
<br>
set DOTNETSDK=C:\Program Files\Microsoft.NET\SDK\v1.1 (not needed) <br>
set MSVC=C:\Program Files\Microsoft Visual C++ Toolkit 2003 <br>
set MSSDK=C:\Program Files\Microsoft Platform SDK <br>
set VC7=C:\Program Files\Microsoft Visual Studio .NET 2003\Vc7 <br>
set INCLUDE=%MSVC%\include;%MSSDK%\include <br>
set LIB=%MSVC%\lib;%MSSDK%\lib;%VC7%\lib <br>
set PATH=%MSVC%\bin;%MSSDK%\bin;%PATH% <br>
set PATH=%PATH%;%MSSDK%\bin\Win64 <br>
<br>
<b>
cd <WXWIN>\build\msw <br>
nmake -f makefile.vc USE_XRC=1 SHARED=1 MONOLITHIC=1 BUILD=release UNICODE=0 CFG=NonUnicode clean <br>
nmake -f makefile.vc USE_XRC=1 SHARED=1 MONOLITHIC=1 BUILD=release UNICODE=0 CFG=NonUnicode <br>
</b>

<b>
cd <WXWIN>\lib; move vc_dll codeblocks_vc<br>
</b>
<br>
codeblocks <br>
<pre>
project->build options
	directories->compiler
		<WXWIN>\lib\codeblocks_vc\msw
		<WXWIN>\include
		<WXWIN>\contrib\include
	directories->linker
		<WXWIN>\lib\codeblocks_vc
	directories->resource compiler
		<WXWIN>\include
	compiler->#defines
		WXUSINGDLL
	compiler->compiler flags
		enable c++ exception handling (or other options: /GX [same as /EHsc])
	compiler->other options
		delete -D__GNUWIN32__
	linker->link libraries
		delete ctl3d32

compile->compiler options
	programs->additional paths
		C:\wxWidgets-2.6.2\lib\codeblocks_vc
-OR- copy C:\wxWidgets-2.6.2\lib\codeblocks_vc\wxmsw26_vc_custom.dll
     to application exe directory or c:\windows\system32
-OR- change project->properties->targets->execution working dir
     to C:\wxWidgets-2.6.2\lib\codeblocks_vc (not recommended)

compile->compiler options
	programs->additional paths
		C:\Program Files\Microsoft Platform SDK\Bin
 	directories->compiler
		add C:\Program Files\Microsoft Platform SDK\Include
	directories->linker
		add C:\Program Files\Microsoft Platform SDK\Lib

copy C:\wxWidgets-2.6.2\lib\codeblocks_vc\wxmsw26.exp
     to C:\wxWidgets-2.6.2\lib\codeblocks_vc\wxmsw.exp
copy C:\wxWidgets-2.6.2\lib\codeblocks_vc\wxmsw26.lib
     to C:\wxWidgets-2.6.2\lib\codeblocks_vc\wxmsw.lib
copy C:\wxWidgets-2.6.2\lib\codeblocks_vc\wxmsw26_stc.exp
     to C:\wxWidgets-2.6.2\lib\codeblocks_vc\wxmsw_stc.exp
copy C:\wxWidgets-2.6.2\lib\codeblocks_vc\wxmsw26_stc.lib
     to C:\wxWidgets-2.6.2\lib\codeblocks_vc\wxmsw_stc.lib

compile->rebuild
</pre>
<br>
building from the commandline (wxwidgets demos) <br>
nmake -f makefile.vc SHARED=1 MONOLITHIC=1 BUILD=release